0 votes
by (180 points)
Autowatch Ghost 2 Immobiliser Installation Service

imageInstall an immobiliser Ghost that is TASSA approved and DBS security checked.

The ghost immobiliser cost system is completely silent and operates on the CAN data system of your vehicle. It is not detectable by thieves using diagnostic tools, since it doesn't emit any radio signals.

Easy to install

Autowatch Ghost is a discrete anti-theft gadget that protects your vehicle from key cloning or hacking. It utilizes your vehicle's buttons to generate a pin code push sequence which must be entered in order to start your vehicle. This will prevent thieves from stealing the keys to your vehicle and then driving off with it, or at least delaying the trip to have the vehicle repaired.

The system is simple to install using an approved installer such as Car Theft Solutions and doesn't require any wire cutting during installation. It connects directly to the vehicle's CAN data networks so there are no additional "fobs" or other indicators to indicate the presence of the device. This makes it extremely difficult for a modern burglar to spot in contrast to passive anti-theft devices like steering wheel locks.

When the Ghost 2 is installed in your Porsche it will be undetectable by thieves and engine blocked when they attempt to start your vehicle without submitting an app authorization number or pin. The system is able to do this because it uses the factory buttons, such as those on the steering wheel or centre console to let you set up a unique disarm sequence (similar to a PIN number) which must be used before the engine will start.

Once you've got your own personal disarm sequence you can set your Ghost to Valet and Service mode so that when you're having your vehicle serviced or taken to an establishment for work, it can still be started but only allow you to start it with your pre-set pin or app. You can get a new PIN if you forget it. This means you don't need to worry about drivers driving your car that you shouldn't.

The Ghost 2 has QR finger print labels that are connected to the International Security Register and registered to you. This provides you with an additional level of protection in the event that your vehicle is broken for parts as the unique code allows your car to be instantly traced back to you.

Low-maintenance

The car thieves are more sophisticated than ever, and technology has advanced to keep up. The resulting development has seen the development of stealth immobilisers, designed to prevent your pride and joy from becoming their next target. A Ghost immobiliser functions independently of the car's factory-installed alarm tracker, alarm system or other security devices to provide an additional level of protection that cannot be altered.

This advanced technology connects to your vehicle's CAN Data Network and a personalized PIN code sequence is programmed into it using the buttons on your steering wheel door cards or central console. If the unique code isn't entered prior to beginning the engine then the Ghost immobiliser stops it from starting, preventing you and your passengers from leaving the vehicle.

The device is small enough to be concealed in the vehicle wiring harness. It's weatherproof and silent and doesn't emit radio frequency signals, so it isn't detected by the sophisticated RF scanning or code-grabbing technologies some thieves employ. Additionally, because it is connected to the CAN Data Network it can't be disabled with simple wire cutting or circuit jumps, which makes it a low-maintenance device.

If you intend to sell your car at any point and you want to sell it, the Ghost Ii Immobiliser immobiliser can be transferred to a new vehicle if it meets compatibility criteria. This means that if your vehicles in the time you own the Ghost it will not become obsolete. This is a major ghost ii immobiliser benefit for those who take pride in their cars.

The Ghost is an immobiliser of the present that doesn't require an additional keyfob or LED indicator to work. This means that it can be used in the dark. The PIN can be as short or as long as you like (up to 20 presses) and it can be changed in the event of an emergency in the event that you forget your PIN. It is also possible to put it into valet and service mode, so that your car can begin to drive for a short period when you have to leave it with valet or mechanic for some work without having to remember the PIN.

Unrecognisable by thieves

A standard factory-fitted immobiliser safeguards your vehicle by stopping the engine from starting if it does not have the proper key fob and code sequence. However, a Ghost immobiliser functions in a different manner. It communicates with the electronic control unit of your car ghost immobiliser by connecting to CAN data circuit. This means that thieves can't bypass the system by changing the ECU or by using other methods. It's also quiet and does not emit radio signals. This makes it impossible to detect.

This means that if have a unique or expensive car, Ghost can keep your prized possessions from the hands of thieves. You can feel secure knowing that the money you put in customizing or altering your car is protected.

Ghost is a discreet and simple device that's fitted into the wiring of your car which means it won't interfere with the aesthetics of your vehicle. It connects to the CAN bus network and communicating with your vehicle's center console or steering wheel buttons. It's easy to install and can be hidden, ensuring that it is inaccessible to thieves. It's also low-maintenance and does not require batteries or a radio signal to operate, which means it won't be susceptible to hacking.

The autowatch Ghost-II anti-key clone immobiliser an elegant new device that will provide your car with advanced security. The first CAN bus-based aftermarket immobiliser to be verified by TASSA This system is a must-have for anyone who is concerned about the safety of their car.

With car theft on the rise, it's important to take steps to stop it. The Ghost immobiliser is a fantastic solution. This system is able to block your engine until you enter a unique pin or download the app on your smartphone. This makes it difficult for a burglar to start your car, even if they have the correct keys.

A Ghost immobiliser can give you peace of heart for a low cost. It can be a heartbreaking experience especially if you've spent lots of money and time into your vehicle. The Ghost immobiliser will keep your joy and pride where it belongs.

Fits without leaving marks on the body of the vehicle.

An immobiliser is a device to prevent your vehicle from being taken away without your key fob. Since 1998, immobilisers have been mandatory for all new vehicles. They are plugged in your vehicle's CAN network so thieves cannot detect them or disarm them by cutting wires. This makes it nearly impossible for thieves to steal your car as they won't be able to start the engine without your key fob or mobile phone with the Autowatch app downloaded. This is especially crucial if you've spent time and money to customize your vehicle, since it will prevent thieves from stealing your car without your say-so.

The Ghost 2 immobiliser can be fitted in a hidden location to ensure that it isn't visible to anyone with a non-trained eye. It is connected to the CAN (controller of vehicle) and is controlled by your ECU. It is extremely small, quiet and does not transmit radio signals, so it isn't able to be detected by thieves. The Ghost also has an internal battery which can be easily replaced and will continue to operate in the event of a power failure.

After the Ghost is fitted, it will require an initial pin code sequence to be entered for the car to start. This can be done via the app on your phone and only you know the unique code.

Your answer

Your name to display (optional):
Privacy: Your email address will only be used for sending these notifications.
Welcome to FluencyCheck, where you can ask language questions and receive answers from other members of the community.
...