Protect Your Pride And Joy With The
Ghost 2 immobiliser Immobiliser
Ghost Immobiliser will protect your valuable property from theft. It is discreet and doesn't require additional key fobs.
The device makes use of buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin sequence that can be changed up to 20 times. This then authorizes the vehicle to start.
Simple PIN code change process
Many homeowners are upgrading their security due to the rising number of vehicle thefts. There are a variety of aftermarket security devices that range from tracking systems to alarms and immobilisers. However they do not all are equally efficient in protecting your vehicle. A tracking device can assist you in locating your vehicle in the event of it being stolen however it cannot stop the crime. An immobiliser, on the other hand is exactly what says on the label: it shuts off the engine of your vehicle so that it cannot be started. The Autowatch Ghost is one of the most sophisticated options available, making it virtually impossible for thieves steal your car.
The ghost device utilizes the buttons on your car to generate an unique sequence that needs to be entered to allow the engine to begin. This can be accomplished by using the window,
Near me heater or indicator stalk buttons. Additionally, there is also an app for mobile devices that acts as an emergency PIN code bypass and allow the driver to operate the car without having to use the button sequence. This is a great solution for those who want to offer your car to valet parking or for maintenance. The immobiliser will remain in operation.
The Ghost is a very unique and innovative device that works in conjunction with the buttons in your vehicle instead of being a separate device. It's not just an effective deterrent to vehicle theft and vandalism, but it can be used on future vehicles you own. This makes it a much better investment than a traditional wheel lock.
Small, weatherproof device
The Autowatch Ghost Immobiliser is a sophisticated security device that shields your vehicle from key cloning and hacking. It also prevents ECU swapping. It's a small weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be fitted into the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant to jamming devices, which is the most common method used by car thieves to circumvent existing immobilisers.
The advantage of using CAN data is that it runs silently compared to traditional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies and cannot be recognized by conventional diagnostic tools. The Autowatch
ghost immobiliser fitting near me does not use LED indicators and instead uses buttons in your vehicle, such as the steering wheel, centre console, or doors, to create a unique disarming sequence. The sequence can be extended 20 or more presses to provide additional security. The iPhone app only allows one connection, using a unique pairing code for the Ghost. All communication between the two devices is secured.
The Ghost also stops car thieves from using the key to a new car or replacing the ECU to bypass the immobiliser and start the engine. It will only allow the engine to run if the correct PIN code is entered. It is possible to operate temporarily in Valet/Service mode (with the appropriate parameters, like a 30mph speed limit), so you can hand your car to a valet or service without entering the code.
Every vehicle is tested
The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device detects signals to prevent your car from starting normally until you enter a specific code. The system can be activated or deactivated through your smartphone's app without the need for wires.
Standard factory immobilisers for vehicles function by using an electronic transponder in the key that sends an indication to the ECU. The car will start if the correct code is transmitted. However, if a transponder of a different vehicle is used instead, the immobiliser will not recognize it. This makes it possible for the vehicle to be stolen and then started. The Ghost immobiliser has been developed by an South African company at the top of security systems for vehicles technology. It protects your vehicle from hacking, key cloning and even key theft. The only way that a burglar could take your vehicle is physically towing it away and even then they would not be able to drive it.
Ghost uses the buttons in your vehicle, including the indicator stalk along with the steering wheel, indicator stalk and door panels to generate an unique PIN code that is changeable that needs to be entered before you are able to use your car. This is done without the need for additional hardware, such as a key-fob and can be up to 20 presses long. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, so thieves cannot use sophisticated RF scanners or code grabbing technologies to identify that an installation has been made.
In contrast to the physical devices that prevent theft, such as wheel locks or clamps, Ghost is concealed within the vehicle so it can't be disabled or removed by thieves and is also harder to remove than a car alarm, which requires disarming with the use of a button sequence. This makes it a great alternative to a GPS tracking device that can be used to locate your vehicle after it's been taken.
Emergency PIN code override
You don't have to look far on social media for stories or videos of vehicles that were stolen using the most advanced technology tools. Key-cloning devices, for instance, and hacking tools that allow thieves to start the vehicle without your original keys.
The Ghost immobiliser helps combat this issue and offers an additional layer of protection to stop your vehicle from being taken if it is targeted by thieves. It works by creating an individual pin code push sequence using the buttons you have on the steering wheel, door panel, and the centre console. This unique PIN is entered in conjunction with the original key fob to stop the engine from getting started. The unique override pin is found on a black card which you will receive following the installation. It is easy to remember because there aren't any LED indicators.
The device is hidden inside the vehicle's wires, and does not emit radio signals, which means it cannot be detected by modern criminals with diagnostic software that can identify the security system you have installed. This makes it a fantastic alternative to the tracking device.
Contrary to other security systems that rely on a relay located in the engine bays, CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to block a vehicle completely,
near Me by sending an electronic block to the ECU and engine.
It is also possible to connect an analog immobiliser, alarm, or tracker to these systems, however this must be specified before installing the device. They are also service/valet-mode compatible and a good alternative to a tracker when you have your car checked for an electrical fault at the dealers.
Service/Valet mode
In recent times, there has been an increase in vehicles being stolen with the owners' keys. It is easier than ever to steal your pride and joy thanks to the availability of key cloning tools and door lock picks. We have created the Autowatch Ghost Immobiliser to combat this.