0 votes
by (120 points)
Autowatch Ghost 2 Immobiliser Installation Service

imageGuard your prized possessions from car thieves of today by using our TASSA approved, DBS security checked and Ghost immobiliser installation by a trained system service.

The Ghost system is completely quiet and operates on the CAN data system of your vehicle. It is not detectable by thieves using diagnostic tools because it does not emit any radio signals.

Easy to install

Autowatch Ghost is a subtle anti-theft gadget that protects your vehicle from key cloning and hacking. It makes use of your vehicle's buttons to create a pin code push sequence that must be entered in order to start your vehicle. This will stop thieves from taking your keys and driving off with your joy and pride or at least delaying your trip to repair your car!

The system can be installed by a certified installer like Car Theft Solutions. No wires are cut during installation. It is directly connected to your vehicle's CAN data network and there aren't any additional "fobs" or indicators to signal the presence of the device. This makes it incredibly difficult for a modern thief to detect, unlike passive anti-theft devices such as steering wheel locks.

When the Ghost 2 is installed in your Porsche it will be virtually unnoticed by thieves and blocked if they attempt to start your car without submitting an app authorization number or pin. The system is able to achieve this by using factory buttons on the steering wheel and central console. You can also set up a unique sequence of buttons (similar to a pin number) that must be used to start the engine.

Once you've got your personal disarm sequence, you can set your Ghost to Service and Valet mode so that when you're having your car serviced or taken to garage for work, it can still be started but will only allow you to start it using your pre-set pin or app. You can also retrieve the pin if you forget it. This way, Ghost Immobiliser Installation you don't have to worry about drivers driving your car who aren't.

The Ghost 2 also features QR finger print labels that are registered to you and linked to the International Security Register. This gives you an additional layer of security in the event that your car is damaged or destroyed in the course of a repair. The unique code lets you trace your vehicle back to you in a flash.

Low-maintenance

Car thieves have never been smarter and therefore technology has to improve to outsmart them. The result has led to the development of stealth immobilisers specifically designed to keep your car from becoming their next target. Ghost immobilisers function independently of the vehicle's factory-installed alarm or tracker security devices. They offer an additional protection that can't be altered.

This cutting-edge technology is linked to your vehicle's CAN Data Network. A personal PIN code is entered using buttons on the steering wheel, door cards or the centre console. The Ghost immobiliser will not start the engine if this unique code isn't entered prior the start of it. This will stop you and your passengers driving away.

The device is small enough to be hidden inside the wiring harness of your vehicle. It's weatherproof, operates quietly and does not emit radio frequency signals, which means it cannot be detected by the sophisticated RF scanning or code grabbing technologies that some thieves employ. It is also very low maintenance because it's connected to the CAN Data Network and can't be disabled with simple wire cutting.

If you're planning to sell your vehicle at any point you can use the Ghost immobiliser can be transferred to the new vehicle as long as it meets the compatibility requirements. If you decide to switch vehicles during the time you own the Ghost the Ghost will not be deemed obsolete. This is a huge benefit for those who are proud in their vehicle.

In contrast to older immobilisers unlike many older generation immobilisers, the auto ghost immobiliser does not require an additional key fob or LED indicator to function, which means it is able to be used in darkness. The PIN is programmable (up to 20 presses) and can be changed in a moment of need if you forget it. It is also possible to put it into service and Ghost Immobiliser Installation valet mode, allowing your car to be driven for a brief period of time in the event that you need to leave it with an valet or mechanic for a few hours without having to remember the PIN.

Unrecognisable to thieves

Standard factory-installed immobilisers safeguard your vehicle from theft by preventing it from starting without the proper code and key fob. However, a Ghost immobiliser works differently. It is connected to the CAN data circuit and then communicating with your car's electronic control unit. This means that thieves are unable to bypass the system by programming the ECU or using other methods. It's also silent and doesn't emit radio signals making it impossible to detect or fake.

This means that if you have a unique or expensive car, Ghost can keep your prized possessions from the hands of crooks. You can be confident that the investment you made in customizing or altering your vehicle is protected.

Ghost is a discrete and simple device that's integrated into the wiring of your car so it doesn't interfere with the aesthetics of your vehicle. It connects to the CAN bus network and communicating with your vehicle's center console or the steering wheel buttons. It's easy to install, and it can be concealed so that it is not detected by a thief. It's also low maintenance and doesn't require batteries or a radio signal, so it will not be vulnerable to hacking.

The autowatch Ghost-II Anti-Key Clone immobiliser is an elegant new device that can provide your vehicle with a high level of security. This system is the first CAN-bus aftermarket immobiliser that's been tested by TASSA. It's an absolute must-have for anyone who is concerned about the safety of their car.

With car theft increasing, it's important to take measures to stop it. The Ghost immobiliser is a fantastic solution. This innovative system locks your vehicle until you enter a specific code or use the application. This makes it impossible for thieves to start your car even with the right keys.

A Ghost immobiliser can give you peace of mind for a low cost. Especially if you've put many hours and money into your car, it can be very heartbreaking to lose it to criminals. The Ghost immobiliser is the best option to safeguard your pride and joy, so that you can keep it where it belongs.

Can be fitted without any marks on the internal body of the vehicle

An immobiliser is a device to prevent your vehicle from being stolen without a key fob. Since 1998, immobilisers are required on all new cars. They are installed in the CAN data network of your vehicle and therefore thieves cannot detect them or disable them by cutting wires. It is nearly impossible for thieves to steal your car because they cannot start it without your key fob or smartphone with the Autowatch application installed. This is important, especially when you've invested many hours and money on modifying the car. It will stop thieves from taking it without your consent.

The Ghost 2 immobiliser is able to be placed in a concealed position so that it cannot be visible to anyone not trained. It connects to the CAN and operates through your ECU (engine control unit). It is small, quiet and doesn't emit radio signals. This makes it impossible for thieves to spot. The Ghost has a built in battery that can be replaced so it will continue to function even when there is a power outage.

Once the Ghost is fitted, it will require the pin code sequence to be entered in order for the car to begin. The app on your phone will allow you to enter the code, so that only you are aware of it.

Your answer

Your name to display (optional):
Privacy: Your email address will only be used for sending these notifications.
Welcome to FluencyCheck, where you can ask language questions and receive answers from other members of the community.
...