Protect Your Pride And Joy With The Ghost Immobiliser
Ghost Immobiliser will protect your prized property from theft. This system is discrete and doesn't require additional key fobs.
The device uses existing buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique pin code sequence that can be up to 20 presses. This will allow your vehicle to begin.
Simple PIN Code Change Process
With the growing rate of vehicle thefts, many owners are seeking to improve their security. There are a myriad of aftermarket security devices available including tracking systems, alarms and immobilisers. However they do not all are equally efficient in protecting your vehicle. While a tracking device can assist in finding your car in the case of theft, it does not stop the crime from happening in the first instance. Immobilisers, on the contrary perform exactly as they say on the label - they shut off your car's engine so that it can't be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to steal your car.
The ghost device utilizes the buttons on your car to generate a unique sequence which must be entered in order for the engine to start. This can be accomplished by using the window, heater or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their car without the button sequence. This is a great option if you want to give your car to valet parking or for maintenance. The immobiliser will remain active.
The
ghost Immobiliser problems is an unique and innovative device that works with the buttons of your vehicle instead of as a standalone device. It is not only an effective deterrent for vehicle theft and vandalism, but it can be used on future vehicles you own. This makes it a far better investment than a traditional wheel lock.
Small, weatherproof device
The Autowatch ghost immobiliser is a sophisticated security system that guards your vehicle from key cloning, hacking and ECU swapping. It is a tiny weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus to disable the motor. It can be fitted into the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also indestructible to jamming devices, which is an approach used frequently by car thieves to circumvent existing immobilisers.
The advantage of using CAN data is that it operates silently in comparison to conventional systems. It cannot be detected using sophisticated RF scanning and
Ghost Immobiliser Problems code-grabbing techniques as well as identified by conventional diagnostic tools. The Autowatch ghost doesn't produce LED indicators and instead uses the buttons in your vehicle such as steering wheel, centre console or door panels to create a unique, programmable disarm sequence. You can create a sequence that is as long as 20 presses to increase security. The iPhone app is limited to one connection, using the Ghost's unique pairing code. the Ghost. All communication between the two devices is encrypted.
The
ghost immobiliser installers near me prevents car thieves adding an ignition key replacement or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to start if the correct PIN code is entered. It can also be put in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can hand your car over to a valet service for servicing without the need to enter a pin code.
Tested for each vehicle
The Autowatch Ghost is the first aftermarket immobiliser on the CAN bus that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device is able to intercept signals and prevent your car from starting normally until you enter a custom code. The system can be turned on and off through your smartphone's app without the need for additional wires.
Standard factory immobilisers on vehicles function by using an electronic transponder in the key, which sends an electronic signal to the ECU. If the correct code is sent, the car will start however, if the transponder is swapped with one from a different vehicle, the immobiliser won't recognize it. This allows the vehicle be started and stolen. The Ghost immobiliser was created by an South African company at the top of the line in vehicle security technology. It protects your pride and joy from key cloning, hacking and even key theft. The only way a thief could take your vehicle is physically towing it away, and even then they would not be allowed to drive it.
Ghost uses the buttons in your vehicle including the indicator stalk, steering wheel and door panels to generate an individual, changeable PIN code sequence that must be entered prior to you can drive. It does this without additional hardware, like keys fobs. It can take up to 20 presses. It is also unrecognizable to diagnostics equipment and does not transmit radio frequency signals, so thieves are unable to use sophisticated RF scanning or code grabbing technology to discover that security systems have been installed.
Unlike physical anti-theft devices like clamps or wheel locks, Ghost is covertly integrated into the vehicle so it can't be disabled or removed by thieves. It's more difficult to remove than a car alarm that requires disarming via an action sequence. This makes it an excellent addition to an GPS tracking device that can be used to track your vehicle after it's been stolen.
Emergency PIN code override
You don't have to go far on social media to see stories or even videos of vehicles that have been taken by thieves using the latest technology tools available to them. Key-cloning devices, for instance, and hacking tools that allow them to start the vehicle with your original keys.
The Ghost immobiliser has been designed to combat this and offer an additional layer of security in order to keep your vehicle from being targeted by thieves. It works by creating a unique pin code push sequence using the buttons you have on the steering wheel, door panel, and the center console. The unique pin code is entered in conjunction with your original key fob in order to prevent the engine from beginning. The unique PIN for override can be found on the black card you will receive after installation and is easy to remember since there are no LED indications.
The device is hidden within the wiring of your vehicle and does not emit radio signals. Therefore, it cannot be detected by diagnostic software that can tell the security system you have installed. This makes it a great alternative to a tracker.
Unlike other security systems, which rely on a relay in the engine bays, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the car. This allows them to disable the vehicle completely by sending an electronic block to the ECU and engine.
It is also possible to connect an analog immobiliser, alarm, or tracker to these systems, however this must be specified prior to installing the device. They are also service/valet mode compatible and are a great alternative to a tracker when you have your car checked for repairs to an electrical issue at the dealers.
Service/Valet mode
In recent years there has been an increase in vehicles being stolen without the owners keys. It is easier than ever before to take your joy and pride due to the availability of key cloning tools & door lock picks. We have developed the Autowatch Ghost Immobiliser to combat this. It prevents your car from being driven, even if you keys have been cloned.
It connects directly to your cars ECU (Engine Control Unit) via the CAN data circuit.