How to Replace a Saab 9-3 Key
The Saab 9-3 has a great variety of appeal to drivers. It has excellent visibility and a powerful performance engine. It also has a great safety rating.
It is nevertheless important to make sure that you have at least two keys that work for your car. It can be expensive to replace a key if you lose it.
How to replace the ignition Key in the Saab9-3
If your car's key doesn't start in the ignition, you need to replace it. This guide will guide you through how to do it on a Saab 9-3. You will have to replace the key, buy an additional reprogrammable cell and buy a new case for your key-fob.
Most modern Saab models use transponders instead of a key made of metal to unlock the vehicle and allow it to start. The problem with this is that the reprogrammable battery on the key-fob will wear out and lose charge for any longer. This is especially applicable if you are using the same key for the same lock.
A professional locksmith can replace the battery quickly. You can also do it yourself if have the proper tools and a bit of patience. The first step involves separating the key-fob. Insert an open-ended head into the slot that is in the middle of your case. You will need to work slowly, since the plastic is very thin and is susceptible to damage.
After the case has been opened, you can create the new key by combining lower part of the key from earlier with a transponder and banana. This will ensure that the new key is connected to the CIM properly, which could make a huge difference when replacing the only key for your
saab 93 key programming 9-3.
How to Replace the Ignition Key on the Saab 900
If you don't have two keys you'll have to remove the steering wheel and dashboard to access the ignition. Start by disconnecting your negative battery cable. After the battery has been disconnected, you are able to remove the trim and dashboard pieces that surround the steering wheel. Once the dash has been removed, insert screws into the hole behind the ignition switch.
The ignition cylinder comes with a key lock which could stop the vehicle from starting if you don't have a key. If the ignition switch on your 900 isn't working properly, check to see whether the key is inside the lock or snared inside the ignition barrel. It's also recommended to rotate your keys often and clean them regularly to ensure that they don't get bent.
Saab cars differ from other cars in that they don't use traditional metal keys. Instead, the car is able to recognize the electric signals of the key fob through a chip that is specifically designed for it.
If you have lost your only working key fob, the dealer will charge you top dollar for replacing your computer module (known as the CIM). We can reprogram the EEPROM on your existing computer and enable it to accept new keys without the need to replace it. You will save over 50% on the price charged by the dealer! We call it the SAAB KEY PROGRAM. Learn more about it here!
How to Replace the Ignition Key on a Saab 9-5
The metal portion of a classic
Saab key is easy to copy, and not much of a barrier against theft of vehicles. The electronic part of the key-fob comes with a chip that can recognize the car when the key is inserted into the ignition switch.
Saab has relied on the technology of this anti-theft system for over 10 years. It's not quite as effective as a door lock but it does make stealing your car much more difficult. Every
saab replacement key programming owner must keep an extra
saab replacement key key in their vehicle.
Most new Saabs come with two keys in the factory, but you can purchase additional keys at an authorized dealer using a handheld computer referred to as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is the NG 9-3 vehicles, which come with modern, more advanced features that require a separate key-fob to operate using a different procedure.
The dealer will replace the CIM or TWICE module in these cars if keys are lost, and charge you a high price to do it. However, we can reprogram the EEPROM in your existing computer and prepare it to accept new keys, and not replace the expensive modules.
how to program saab 9-3 key fob to Replace the Ignition Key on the Saab XC90
It's probably time to replace your SAAB key fob if it's having difficulty turning the barrel of the lock. The process is fairly simple and you don't have to visit a dealership. You can complete the process at home using just a few basic tools.
First, you'll need to prepare the keys for your new car. Before you begin, turn off the anti-theft system by placing blocks under your rear wheels and releasing your handbrake. Next, put the key in the ignition and switch it to the on position which activates the accessories, but it does not start the engine. Repeat this five times, then turn off the key on the "on" position.
The next step is to purchase a new case for the old key fob. You can find them at any auto parts store and they're usually quite affordable. You can purchase them with or without electronics, depending on the model.
To open up the case, insert an flathead screwdriver into the slot that is in the middle and gently work it. The case will break easily and, once you've got it open, you'll get access to the internal electronics. Use a flathead screwdriver to gently remove the electronics.